IP67 dog training collar receiver for a remote training setup, with a durable ABS housing, rechargeable power, and an adjustable belt for a range of dog sizes. The listed receiver supports static, vibration, and beep modes so you can select the mode indicated by your compatible remote control.

This receiver is designed for practical everyday training sessions. Its sealed IP67-rated housing helps protect against dust and splashing rain, while the compact format and adjustable strap make setup straightforward. The product is a collar receiver accessory; the package contents listed below do not include a remote control.

Key features

• IP67-rated ABS housing: The receiver uses ABS material and a sealing process. It may be used in rainy or snowy conditions as described by the supplier, but it must not be immersed in water.
• Remote signal reception: The built-in high-sensitivity chip is specified to receive signals from approximately 984–2625 ft away, depending on the remote-control setup and conditions.
• Three training modes: Static, vibration, and beep modes are available according to the indication of the remote control.
• Rechargeable battery: The built-in 300mAh lithium battery charges by USB. A full charge is listed as approximately 3 hours, with approximately 3 days of use.
• Adjustable belt: The smooth belt has an adjustable range of approximately 7.9–26.8 in (20–68 cm), intended to fit different-sized dogs when correctly fitted.

Specifications

• Product type: Dog Training Collar Accessory
• Material: ABS
• Battery: 300mAh lithium battery
• Charging: USB; approximately 3 hours
• Listed use time: Approximately 3 days
• Waterproof grade: IP67
• Receiver size: 6 × 3.5 × 4 cm (2.4 × 1.4 × 1.6 in), L × W × H
• Adjustable belt: Approximately 73 cm (29 in); range 20–68 cm (7.9–26.8 in)
• Item weight: 95 g (0.21 lb)
• Packaging: 9 × 8 × 4 cm (3.54 × 3.15 × 1.57 in), 113 g (0.25 lb)

Package contents

• 1 × collar receiver
• 1 × adjustable belt
• 1 × test bulb
• 2 × silicone contactors

Use and care

Use the collar receiver only with a compatible remote control and follow a humane, consistent training approach. Before each session, inspect the belt, receiver, contactors, and charging connection for damage. Fit the belt securely but comfortably, leaving room for normal movement; check the fit regularly and remove it if your dog shows discomfort or irritation. Follow the remote-control instructions when selecting a mode, and do not use any setting longer or more often than the instructions recommend. Keep the receiver dry during charging, do not immerse it, and allow the unit to dry before storage after use in wet weather. The supplied test bulb can be used as a simple function check according to the remote-control instructions.