Solar Ultrasonic Animal Deterrent with 5 Settings provides configurable outdoor sound and light options for gardens, yards, and farms. It combines a PIR motion sensor with ultrasonic frequencies, an audible alarm, and six red-and-white flashing lights, so you can select a setting that suits your space without relying on a one-size-fits-all mode.

This solar ultrasonic animal deterrent can use sunlight or the included micro USB cable for charging. The green ABS unit supports hanging or ground-stake installation, giving you flexibility when positioning it outdoors. Performance depends on placement, sunlight, and the direction of movement detected by the PIR sensor; it is not a guarantee that every animal will respond.

Key features

• Five selectable settings: choose from ultrasound-only ranges or ultrasound combined with strobe light. The stated frequency range is 13.5–45.5 kHz.
• Motion sensing: the PIR sensor covers up to a 120° angle and up to 10 m/32.8 ft. It is more responsive to lateral movement than to direct, radial approach or a stationary animal.
• Dual charging: use the polycrystalline solar panel or micro USB charging. The built-in rechargeable battery is 1200 mAh.
• Outdoor-ready construction: the ABS housing is rated IP44. Choose a sunny location and use either hanging or ground-stake installation.
• Adjustable controls: the audible alarm control provides alarm and ultrasound on/off functions plus volume adjustment; the frequency and flashing knob selects the operating gear.

Specifications

• Color/material: green ABS.
• Charging: solar input 4.2–5 V/0.5–0.6 A, about 2–2.5 hours; micro USB input 4.2–5 V/0.8–1.0 A, about 1–1.5 hours.
• Runtime: about 12 hours, varying with local direct sunlight.
• Timer/lights: operates for around 45 seconds after sensing movement; six red-and-white flashing lights.
• Size/weight: 39 × 13 × 5 cm (15.35 × 5.12 × 1.97 in), 266 g (0.59 lb). Charging cable: 18.5 cm (7.28 in).

Gear guide: Gear 0 is off. Gear 1 (13.5–19.5 kHz) is listed for mice, dogs, rabbits, foxes, and ferrets; Gear 2 (19.5–24.5 kHz) for cats, raccoons, badgers, and skunks; Gear 3 (24.5–45.5 kHz) for mice and snakes; Gear 4 adds strobe light to 24.5–45.5 kHz; and Gear 5 combines 13.5–45.5 kHz ultrasound with strobe light. These are the supplier’s suggested ranges, not a guaranteed outcome.

Setup, care, and package

Place the unit where it receives plenty of sunshine, then mount it by hanging or with the ground stake. Rotate the audible alarm control to activate the alarm and ultrasound before adjusting frequency or strobe light. Do not hammer the unit, detach it, or soak it in water for long periods. There is no charging indicator, so do not leave it charging overnight. Keep the sensing limitation in mind: a stationary animal or one approaching directly may not trigger the PIR sensor as effectively.

Package contents: 1 solar animal driver, 1 micro USB cable, and 1 user manual. Package size is 15 × 13 × 9.5 cm (5.90 × 5.11 × 3.74 in) and package weight is 348 g (0.76 lb).