3280ft dog training collar for structured obedience practice at home or outdoors. Choose the Train Collar Set or the Receiver Only option and review the fit, operating limits, and safety notes below before ordering.

Key features

• Three training modes: beep, vibration, and static shock. Beep is tone-only; its intensity is not adjustable.
• Adjustable levels: the listing specifies 1–100 levels for static shock and vibration. Begin at the lowest level and use the least stimulation needed for your training plan.
• Long-range control: the listed remote range is up to 1,000 m / 3,280 ft / 1,093 yards with no obstacles. The remote has three channels and is listed to support training up to three dogs simultaneously.
• Water resistance: the receiver is rated IP67 and the transmitter IPX3. The receiver is not intended for prolonged immersion.
• Rechargeable power: both remote and receiver charge in about two hours. Listed standby is up to 180 days for the remote and 25–40 days for the receiver, depending on use. An adapter is not included.
• Adjustable reflective collar: the strap is listed for dogs aged 6 months or older, weighing 4.4–99 lb (2–45 kg), with a neck circumference under 26.38 in / 67 cm.

Choose the right option

Train Collar Set: includes the remote transmitter, collar receiver, adjustable collar belt, 2-in-1 Micro USB charging cable without adapter, test bulb, long and short conductive silicone caps, long and short contact points, anti-shock pads, lanyard, pin, and user manual.

Receiver Only: includes one collar receiver and one adjustable collar belt. It should be used with the corresponding GPCT3617 remote controller listed by the supplier; it is not a complete remote-and-collar set.

Fit, care, and responsible use

• Fit the receiver snugly but leave enough room for one finger between the strap and your dog’s neck. A collar that is too tight or worn too long can cause skin irritation.
• Use the conductive silicone caps as supplied. Do not leave the collar on for more than 18 hours per day, and reposition it every 1–2 hours when possible.
• Use beep or vibration first. The supplier advises avoiding static shock except in an emergency; if it is used, start at level 1 and increase only as necessary. Stop if your dog shows distress and use humane, reward-based training alongside any device.
• Keep the transmitter within its operating limits and inspect the fit and contact points regularly. The collar cannot receive signals while it is charging.
• For thick neck hair, use the longer screw caps. If the strap must be shortened, follow the supplied trimming guidance: the cut edge can become a burr, and the guidance recommends carefully melting that edge with a lighter. Keep heat away from your dog and handle the finished strap only after it is cool.

Specifications

• Materials: receiver ABS, silicone, and nylon; receiver-only listing specifies ABS.
• Color: black. Channels: 3. Receiving frequency: 433 MHz.
• Power: remote 300 mAh lithium battery; receiver 650 mAh lithium battery; 2-in-1 charging cable. Listed input is 100–240 V / 50–60 Hz and listed output is 5 V / 1 A; the supplier also shows “300 mAh/500 mAh” beside output, so verify electrical details against the included manual.
• Temperature: below 45°C / 113°F. Remote screen: 2.7 cm / 1.06 in.
• Dimensions: collar belt circumference 67 cm / 26.38 in; strap circumference 76 cm / 29.92 in; receiver without contacts 6 × 3.5 × 3 cm / 2.36 × 1.38 × 1.18 in; transmitter 4.7 × 14.2 × 2.4 cm / 1.85 × 5.6 × 0.95 in.
• Weights: receiver 46 g / 0.1 lb; transmitter 53 g / 0.11 lb; package 250 g / 0.55 lb.
• Other listed dimensions: charging cable 64.5 cm / 25.4 in per line; test bulb 4.5 × 2.5 × 0.7 cm / 1.77 × 0.98 × 0.28 in; each anti-shock pad 1.8 × 1.8 × 0.4 cm / 0.71 × 0.71 × 0.16 in; package 17 × 10 × 5.5 cm / 6.69 × 3.94 × 2.17 in.

Receiver-only specifications: receiver package 12 × 11 × 4.5 cm / 4.72 × 4.33 × 1.77 in and 112 g / 0.25 lb. Its listed receiver standby is 25–40 days after about two hours of charging, depending on use. Keep the product dry beyond its stated rating, charge with the supplied cable, and consult the user manual for operation.